Product Number:Model:T2-S113A 600W
18.4V/150W x 4 pieces(600W)
12V/200AH x 2（400Ah）
AC 220V OUTPUT
Output voltage ：AC 220V(50Hz ±0.3Hz)
Output power ：2000W
Output wave form ：Pure sine wave
Conversion efficiency：>98% (Reference value)
DC 12V OUTPUT
Output voltage：DC 12V
Output current：10A (Max.)
AC charging mode
2、AC 220V/110V or Generator
1、About 6.5 hours
2、市电充电约4小时 By AC grid about 4 hours.
Switch time for system to grid
Main case box:762x410x870mm
Main case box：182KG
1) 5 mobile phone charging adapters USB Connector
2) 4 5W LED lights LED Light
3) Solar panel 10 meters wire Cables
4) A manual Manual
Home appliances(as following)and Time supply for reference
Constant Current(Amp)and Constant Power(Watt)Discharge Table AT 25°C(77°F)
Power and quantity
The system uses a high-performance inverter with strong load capacity, safety and stability, high reliability and perfect protection. With input over-voltage protection, output overload, over-charge, short-circuit protection; machine over-temperature protection, etc., can resist large currents to start load shock. System charging is also very strong, not only can use solar panel charging, but also the city's complementary charging function, the machine is equipped with a high-current charger with self-controlled charging technology, fast charging speed, stable floating charging voltage, and charging current can be 0-70A Adjustable, three-stage charging, can effectively protect the battery. Another LCD display can display working status, mains voltage, output voltage, battery power, frequency, load rate, fault and other information; and has sound and light fault alarm, indicating fault and other functions.
Solar home power generation system T2-S113
1. Scope of application:
1) Power the home appliances, such as DVDs, TVs, fans, lights, etc. (The total power of the appliance must not exceed 1500 watts)
2) Charge electronic products such as cell phones, digital cameras, MP3, GPS, PDA, radio, etc.
3) Camping in the wild.
2. Product schematic
1) Maximum solar support: 36V600W
2) Maximum battery support: 24V400AH
3) Controller: 24V50A
4) Inverter: 1500W
5) Solar input voltage: 36V
Output voltage: 3.5V+5V+8.4V+24V+110V/120V/220V/240V
6) Interface: 12 (2 * USB, 6 * DC output, 2 * AC output, 1 * solar input, 2 * battery expansion terminal)
USB output voltage: 3.5V+5V+8.4V
USB output current: 1.5A
DC output voltage: 24V
DC output current: 3A
AC output voltage: 110V/120V/220V/240V
AC output current: 5A
4. Charging / working hours
1) Full charge time 7-9 hours (under standard solar radiation conditions)
2) The use time of the matching LED lamp after fully charged: 100-200 hours
1) 5 mobile phone charging adapters
2) 6 LED lights (4 5W) 5 meters with switch light
3) Solar panel 10 meters wire
4) A manual
1. This system can display daily power generation and cumulative power generation, making it easier and more reliable for you to use others.
2, the system can manually switch solar priority and city power priority, more humane
3. Ultra-low loss, although it is a power frequency inverter, our products not only have a strong load capacity of the power frequency inverter, but some models have lower standby loss than the high frequency inverter.
4, super load capacity, after a number of customer experiments and experiments of our company's engineers, 1KW system capacity exceeds the capacity of some factories 2KW, can bring 1P air conditioning.
5, other advantages, use it will know
The system has the following characteristics:
1. High conversion efficiency. The system uses solar panels with high conversion efficiency to increase the efficiency of solar energy conversion into electrical energy.
2. This system adopts power frequency pure rotating wave inverter, and the output waveform and power quality are very high.
3. This system adopts multiple protection measures. If the output short circuit will cut off the power within 100ms.
4. The system is free to choose solar power and utility power.
5, the use is simple, the system is connected by terminals, the solar panels are connected by DC terminals, and can be connected according to the instructions.
6, user-friendly design, system with LCD display, can display input and output voltage, battery power, waveform and power load.
7, factory inspection, a system from the accessories to the finished product needs to go through multiple tests, once the defective products are found to find out the bad reasons and rework, the relevant personnel also need to make a deep inspection.
8. Perfect product traceability system, each product has an independent service code. Once the product fails, we can immediately find out the date of manufacture and the date of manufacture, and can accurately find out which line above the assembly line. The problem can better serve customers and promote the improvement of product and service quality.
After sales service:
The company's products from design and development to production and shipping, each link is considering after-sales problems, the company's product failure rate is controlled within three thousandths
The company set up customer service department, 6*8 hours service, received customer complaints and responded within 1 hour, submitted complicated problems to technical department, and made solutions within 24
Easy installation, connect the solar panel line to the system host’
Trade transaction information:
Brand Name ：Tunto
Place of Origin : Guangzhou
Minimum Order: 10 sets
Delivery Term: Ex work, FOB, CIF, CFR, etc.
Payment Term: Paypal, west union, TT, LC, etc.
Packaging Details : carton, wooden package, etc
Delivery : 7-10 days
Warranty : 1 year for whole set
Certificate: CE, ROHS, ISO
Service : ODM; technical support; installation service, etc.
Application : for home, factory, building, village, camping, fishing,etc.
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.